Sometimes smartphones develop strange temporary faults for no apparent reason. One of the most common is a complete loss of mobile internet, which means you can only get online when connected to Wi-Fi. Unfortunately, there is no single solution to fix this. In many cases, it is due to changes in the settings of your operating system or the router, but the cause may not always be so apparent. If you are too facing the same issue with your Poco X2, there is nothing to worry about. Here, in this guide, we have covered various methods to fix if your Poco X2 has No Internet When you Turn ON Mobile Data in very simple steps.

Your phone may be properly connected to your WiFi network but it doesn’t necessarily mean you can browse the internet already. There are times when your phone has no internet connection even if everything seems fine. Most of the time, this is an issue with the network but it is also possible that the problem is with your phone.  Most of the time, problems can be solved by the error message itself. These days exceptions are handled in a very proper way. The exact issue is most of the time mentioned there only. If it is not there or you are having a problem understanding that.

We are all aware that Android is a very self-sufficient platform and performs many operations on its own. Thus, a change undergoing in the device’s software is also to be blamed for these types of issues. Just like the reasons which cause the disturbance to the internet connection, the solutions listed and explained below are also easy to understand and simple to implement.

Fix, Poco X2 has No Internet When I Turn ON Mobile Data

Verify Signal Strength

In a lot of network issues, poor or weak signals are to blame. If your Poco X2 is showing No Service all the time recently, be sure to check how the signal bars are showing on your device. Anything lower than 3 bars is not good and can indicate a network issue.

If you are inside a building, try to go out and see if No Service goes away. If you are traveling by car, you may be transiting a dead spot. What you want to do is to move a known well-covered area. If No service remains, there may be an issue with your Poco X2. Continue troubleshooting it by following the steps below.

Get the error

If your Poco X2 shows an error message when connecting using mobile data, you must take note of it. Then, try to do a quick Google search about to see if there’s any available workaround or fix for that particular error.

Reset Network Settings

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • After opening Settings, look for ‘Connection & Sharing’ and open it.
  • After opening Connection & Sharing, scroll down and tap ‘Reset Wi-Fi, mobile & Bluetooth’.
  • Now, tap ‘Reset Settings’ that is located at the center bottom of the screen.
  • Now, it will ask for your lock screen password, confirm it.
  • Now, a popup window will appear asking you the final time.
  • Finally, tap on the Ok button.
  • Tap on it and you’re good to go.

Simple Reboot or Forced Reboot

Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Poco but this applies to every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.

Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.

The other way of the reboot is as follows:

  • Press and hold the volume down button first and don’t let go.
  • Press and hold the power key while holding down the volume down button.
  • Keep both keys held down for 15 seconds or more.

If this doesn’t work then head to the next method. Rebooting your device regularly at least once every week can be beneficial.

Install Latest Software Updates

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Scroll Down and Tap ‘My Device’.
  • Then tap on ‘System Update’.
  • Tap on the ‘Check for updates’.
  • If a system update is available, you’ll see the option on the screen. Tap Download and Install.
  • If your system is up to date, you will see a message stating that the system is up to date.

Here are a few things that are needed to take care while updating your Poco X2 or any device:

  • Your device must be connected to the internet.
  • Your device must have enough space to download the update.
  • Your device should have enough charge, more than 50% to install the update.

Verify Roaming

If you were abroad or out of coverage of your home network recently, the roaming setting must still be on. Make sure to disable it in order for your device to connect to the network normally.

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Now tap ‘SIM Cards & mobile networks’.
  • Scroll down and look for ‘Data roaming’ which will be under the Settings section.
  • Tap on it to open Roaming settings.
  • Now, toggle the slider towards the left turn off the National Roaming.

Change Network Mode

Sometimes, changing a device’s network mode from, say, 4G LTE to 3G can get rid of network problems. If you haven’t tried doing this as of this point, here are the steps to follow:

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Now tap ‘SIM Cards & mobile networks’.
  • Now tap on the network name of which you want to change network mode.
  • Now you will see ‘Preferred network type’ label under the Mobile Network Section.
  • Tap on it.
  • Now select your preferred network mode as 2G or 3G.
  • Restart the device and repeat steps 1-3.
  • Tap 4G or LTE or auto-connect to return to the original configuration.

Manually Disconnect from the Network

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Now tap ‘SIM Cards & mobile networks’.
  • Now tap on the network name of which you want to Disconnect from the Network.
  • Now you will see ‘Mobile Networks’ label under the Mobile Network Section.
  • Tap on it.
  • ap Select manually.
  • Wait for your device to search for networks.
  • Once it’s done searching, select another network to connect to. For example, if you’re on T-Mobile, pick AT&T or any other network.
  • Your phone will be forced to return with an error because it won’t be able to register successfully.
  • Afterward, select your network again and see if your device will now be able to re-register and fix the bug.

Clear Cache from Recovery Mode

In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:

  • Turn off your phone.
  • Now Press and hold Volume UP key + Power Key  on your Poco device simultaneously for a while
  • Once you see the Poco logo, you can release the button.
  • The phone is now booted in recovery mode
  • Use Volume keys to navigate to the Wipe cache partition option
  • To confirm, you can use the Power button.
  • Restart your phone

Troubleshoot apps in Safe Mode

In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:

  • Your device must be powered on.
  • Press the power button on the phone.
  • When the power off, restart, airplane mode, wifi mode, etc. menu will be displayed, release the power button.
  • Now, long-press the Power OFF word on the screen.
  • Keep pressing this word until the Android Safe Mode message is being displayed on your phone.
  • Select to reboot into Android Safe Mode.
  • When done, a dedicated Safe Mode watermark will be displayed on your smartphone
  • Observe the phone and check for the problem.

After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Scroll Down and Tap ‘Apps’.
  • Now, tap on ‘Manage Apps’
  • If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
  • Tap ‘Show All Apps’.
  • Find and tap the appropriate app.
  • Tap Uninstall.
  • Tap OK to confirm.

Factory Reset

From the Settings menu:

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Scroll Down and Tap ‘My Device’.
  • Now again scroll down and tap ‘Backup & Reset’.
  • Now finally scroll till the end and tap ‘Erase all data (Factory Reset)’.
  • Now, tap on the ‘Delete all data’ button that is located at the center bottom of the screen.
  • Now, it will ask for your lock screen password, confirm it.
  • Again it will ask your Mi account password.
  • Enter the password and tap the Ok button.

From Recovery:

  • Turn off the device
  • Press and hold Volume Up key + Power Key
  • Release Power key when POCO logo appears but keep pressing Volume Up key
  • Release Volume Up key when Mi-Recovery Appears
  • Use Volume keys to select and Power key to confirm
  • Select Wipe Data and press power key to confirm
  • Select wipe all data and press power key to confirm
  • Select Confirm press power key to confirm
  • Select “back to main menu” by press power key
  • Select Reboot and press power key to confirm
  • Select Reboot to System and press the power key to confirm.

Conclusion

That was it, this was the easiest way to Fix when Poco X2 has No Internet When you Turn ON Mobile Data. Follow them carefully to get benefits of the feature in your Poco X2. Are you facing any problems and issues with your Poco X2? Then there is nothing to worry about, we have an article dedicated to Poco X2’s issues and guides. Here is the Poco X2 Troubleshooting Guide. Although it’s rare, some cases of the issues on Poco devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Mi Store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Disclaimer

Advertisement

Do you own a Poco Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Poco are coming soon.

If you have any queries regarding this, the comment section always available for you.

  • How to Fix Poco X2 Audio Problem [Low Volume or Not working]
  • How to Fix Emergency Calls Only Bug on Poco X2
  • How to Fix If Gallery App Crash on Poco X2 after Update?
  • After Update, My Poco X2 YouTube Crashing or Not Playing: How to Fix?
  • After Update, My Poco X2 Gmail Crashing randomly: How to Fix?
  • After Software Update, My Poco X2 facing calling issue: How to fix?
  • Why Internet Won’t Connect on Poco X2? How to Fix?